impeller

I've gone through the stickied impeller guide and saw that the 155.5mm ST-CD 10/16 is the preferred impeller. I ordered it from Solas (Amazon) seen here. I was having some work done to the ski since I just bought it and took the impeller to the guy who said the impeller didn't fit at all. I...

I am the original owner of a 2004 Utopia 205 with the 250hp Optimax. The pump has been cavitating for quite a while and pulling skiers is a challenge (not a lot of torq and lots of cavitation). I suspect that it's time for a rebuild. Doing a bit of research, there is not a replaceable wear...

I'm in the process of replacing wear ring and possibly impeller. I'd appreciate any comments on sealing around ride plate to help with cavitation. Also, at what point should I consider replacing impeller? I can already see it's a bit nicked up.

If you ride your personal water craft in weedy lakes or rivers with floating debris, you've got to have an impeller jam removal tool. In this how-to video we show you how to make this handy-dandy tool ...3ftDeep style! https://youtu.be/91gCIT1V7tA

Hi Guys, My RXT-X 2011 recently started not to run that fast in the low RPM's, it is something like your car on ice...it takes time till start running as it has to. I took a picture of the impeller and wear ring and need some advice if they (Wear ring and impeller) need t be replaced. Here...

Solas MC-CD-22/39 Concord Impeller Pitch 22/39 Mercury Sport Jet V6 200-250 HP Uned 2 weeks end of season then took off when I sold the boat in spring. Came off my utopia 205 $200 or best offer it was 365.00 new Can email me and I will contact you as I dont always check the forum...

Solas MC-CD-22/39 Concord Impeller Pitch 22/39 Mercury Sport Jet V6 200-250 HP Uned 2 weeks end of season then took off when I sold the boat in spring. Came off my utopia 205 $200 or best offer it was 365.00 new Can email me and I will contact you as I dont always check the forum...

Just picked up a 1998 GSX Limited. Looking for an impeller that will increase acceleration and top end. A few people have recommended Solas impeller. What's the best pitch to go with? Any other things I need to be aware of when selecting an impeller? Thanks

Hey guys so we took my buddies 96 xp out the other day and notice it was cavitating really bad. Wouldnt even get to plain, just bounce off of rev limiter. After pulling off the jet pump to check it out i noticed that the impeller has no "lateral" play. Im confused because everyone says there...

So i just got done rebuilding my jet pump, everything except the impeller and the shaft it screws onto. After i finished i spun the impeller and noticed that i grazes the wear ring in 1 maybe 2 spots up near the edge of the wear ring. You can feel the hesitation when it gets to that spot or...

Looking for a hole shot quick 0-40ish as fast as I can. I have a Fresh engine. Pulled my stock impeller and going to replace the wear ring. Don't care about top speed. Just fast then turn. 1996 XP. I would like lots of low end without over rev. Thank you for replies..

OK I looked at the forums and did not find anything talking about this particular issue. I have a 96 seadoo GTI and have replaced the wear ring. I was lucky and did not have to remove the impeller to do so. The impeller and shaft turn free and has clearance in the new wear ring. When I attach...

Hi everyone. i bought an 05' challenger 180 4tec boat this past february from a guy on facebook. needless to say, the wear ring and impeller were " not in bad shape" but still need to be replaced. i took the boat out on my 1st ever lake ride. ive never owned a boat before. but this little boat...

I am looking to replace my impeller on my 2004 Sportster LE DI. I dont want to give up any hole shot, but more speed would be nice. The engine is rebuilt stock. I need advise from a boat guy, all the advise I get is "this works great on my jet ski". Any of you boat guys that have some...

Hello Guys, We were playing on Anna Maria island yesterday and my friend was towing for the first time, so he sucked the rope in with starter (he says - the ski was not running). He tried several times to start until I came over and pointed at the rope from the hook to impeller tight as a...

Hi Everyone, I just recently picked up a 2004 Speedster, and took it out tubing last weekend. Long story short, the tube rope got sucked into the impeller and wrapped itself around the driveshaft. I was able to get most of it out, but there is a small section that is between the driveshaft...

I had some cavitation so I pulled my pump and found the ring and prop pretty dinged up. It spins freely but it makes a little of a scraping noise when spinning. Is this normal? the machine has 55 hours on it and had a pump oil change about 10 hours ago. I'm going to change the impeller out so I...

This post is a follow up from the original post from some time ago. I have been busy. search my earlier post as it was closed. I replaced the MPEM, No joy. BTW have one for sale. PM me if interested. Replaced the voltage regulator, again No joy. Replaced the sensor a third time and No...

You're on vacation and suck a big rock into the pump of your 2004 Sea Doo RXP 215. The impeller is damaged, and performance is sacrificed. What to do? This step-by-step "how to" video will get your boat back in the water, and you looking like a jet ski hero again in no time! If you like our...

Been having issues with cavitation on start with this boat. I got a Solas Impeller as a replacement and will put that in today. Before I put it in the pump, I wanted some opinion on the existing wearing. I think I maybe ok. It has some groves in it and it still does fit tight. Here...