impeller

I replaced my wear ring and the impeller rubs in one stop. Is this normal? Its a stock impeller.

I finally started taking apart my jet pump. The wear ring is shot and the impeller shows signs of abuse as well. I need to replace the impeller, a wear ring, and a couple of broken bolts (stator bolt being one of them sigh). I have a couple of questions based on my pictures below: 1. Is there...

I inspected my impeller and there is alot of surface rust. I removed the jet pump and took a closer look at the impeller. Its in good shape no cracks or nicks on the edges just the rust. Should I clean off the rust or should I just upgrade the impeller to a aftermarket. The wear ring isnt in bad...

I just installed a new drive shaft, impeller, carbon seal, drive shaft bumper, drive shaft, support ring , and wear ring.. as well as refurbishing the jet pump with a jet pump repair kit. in my 2007 4tec. I found that the impeller seems hard to turn by hand. And, the engine seems to struggling...

Has anybody put one on their boat. I have the 180 Super Charger Inter-cooled model. The correct Seadoo part number is 204160259 with a progressive pitch of 10 to 21. Solas does not have anything close. I have read good things on their impellers. One guy (on an other forum) said it can...

Okay so I need some help, please and thank you! I bought a 2004 Seadoo Sportster LE DI this past year, ran into a problem recently. Long story short, I need to replace all the impeller and jet pump from what I found online so far. I ordered the entire jet pump housing, complete with shaft...

Hey guys, I purchased a 1996 Sea-Doo Challenger with the single 787cc engine. My main purpose is to take this to my cabin on the Columbia river in WA state and just have something to screw around with. Were kinda off the grid up there so i'm doing a lot of stuff that is more preventative and...

When popping off the cover of the reservoir, about an ounce of water came out before the oil. Does this indicate a problem? The oil was not whitish at all.

So I was just going through my ski getting it ready for the season when i noticed my wear ring and impeller are in desperate need of replacing. Honestly, I don't think they have ever been changed. Does anybody have a any suggestions as to which ones i should get and where? Ill be doing a lot of...

I've got a 2011 GTS. around 350 hours. The splines are almost completely stripped on the impeller and the drive shaft. After I pulled the pump and shaft I noticed wear on the shaft and found it had been rubbing on the carbon ring. Is my engine way out of alignment or did the play caused by...

So this past week I decided to take the wear ring off and smooth out some low spots with jb weld to see if I could get back some lost performance due to cavitation. Got it all done and it looked great. Sunday I decided to haul it out and see how she ran and just like I thought, ran like a dream...

I've got some cavitation after a friend borrowed the jet ski and claimed he fell off of it into some weeds. I wasn't there so I don't know the whole story. I had replaced the wear ring ~6 months ago, still running the original impeller. When I took the pump off, this is what I found for the...

I'm trying to figure out which impeller to get for my 2001 Seadoo GTX DI. I don't want to sacrifice much top end performance but would like to be able to pull a skier with not much effort. I will have 2-3 riders on it most of the time. Looks like the stock pitch on this ski is 15/21. I was...

I have a 2008 sea doo rxp and im looking to upgrade the acceleration or speed, I have heard of different impellers like a acceleration impeller but I have no idea where to get them! I also want to get dirt bike style handlebars but do not know what to get or what else I would need to get...

So i recently rebuilt the top end of my 94 seadoo xp and just finished breaking it in. After tuning the carb I noticed the ski would not move and the was making a terrible noise.I instantly jumped off the boat and swam it back to shore. I took my jet pump and drive shaft out to realize my...

I have a 1995xp, the previous owner put on a high compression head(185psi) and after market flame arrestors. He could never get it to run and I ended up buying it as a basket case. I went through it and fixed his mistimed rotary valve, rejetted the carbs and replaced the leaking crank seals that...

02 rx, Bearings are bad in the jet pump, Impeller is nicked like heck, the impeller is eating up both sides of the plastic before and after the wear ring. wear ring is fine though. So I have the assembly removed, how do i Remove the impeller?

This weekend I got a small branch wedged between the plastic impeller blade and the outer shell. The seadoo would idle fine and go 5-6mph, but when you tried to go faster it would rev and make a horrible noise but not go, so I pulled it out of the water asap and found the small twig. I wedged it...

i have a 1996 seadoo gtx, and i am having some problems with it. i replaced the wear ring last year, but when i put everything all together last year, and put the seadoo in the water it would start up and the motor would run fine but the prop wouldn't spin. Any ideas on what this could be?

I have a 93 GTX. I'm new to jetski mechanics, but am very familiar with mechanics and motorcycles. I just bought this ride and got it running. Compression is 125-126 both cylinders. no oil leaks, fresh gas. Motor runs/idles great. Throttles up great (don't have tach so no RPM reading). Test...