speedster

I had one blow out yesterday. :mad: Anybody have one laying around? Thanks guys.

It finally happened to me. I lost a seat back cushion in my 1998 speedster while cruising yesterday. I'm seeking a red replacement. Let me know if you have a spare.

So, I can get a spare DESS for my Speedster at a Sea-Doo boat dealer, but not at a Sea-Doo PWC only dealer? How does that make sense?

Greetings All, I got the boat back in April and was original going half with a friend of mine. Long story short we got into an argument and he wants nothing to do with the boat basically leaving it to me. Since April he has caused some damage and I would like to repair it but have questions...

Guys & Gals, I am new to the Seadoo thing but have interest in purchasing a used 2007 and or 2008 150 speedster this week. I have found two for sale in my area and I have some questions for others who have experience with this watercraft before I buy which are: What type of things...

One of my local lakes has a HP limit of 190. I just bought a 150 Speedster, 155HP. The decals on the boat says 155HP, but you can buy decals that say whatever you want. I was almost turned down for a permit at my closest lake, but luckily the guy took my word for it. I'm now concerned...

Hi guys, first off let me introduce myself as this is my first post. Im TDK im here in sunny Orlando, Florida. I am a novice boater and am just starting to get my feet wet. My question: I am looking at possible purchasing a 1996 Speedster from a guy who says the boat was running great but now...

Hi, Does anyone know if an engine from a 1994 Seadoo Speedster will fit in my 1999 Seadoo Speedster SK? I'm looking at an engine on Ebay and I wanted to confirm that it will fit before I purchase it. Both engine sizes are the same (the 85hp model). The engine motor # from the 94' is...

(The gist: is this 99 Speedster sk a good deal @ $6300?) Love this forum! I've lurked for quite some time. Seems like a pretty neat community here. I'm not new to boating, per se, but have never OWNED a boat-- Always wanted to! Scared to death to own one because I'm not especially...

I am trying to remove the console (dash cover) on my 97 Speedster in order to paint it. The hinge holding it on has a combination of rivets and bolts. Also the the wires for the tachs and speedo run to harnesses inside the console and the harnesses cannot fit through the grommets/holes in...

Just bought a speedster and having issues with it. Only one engine will start and run. We have: Checked every possible fuse known to man-NONE blown Ohmed and checked continuity Swapped starters-Both good New solenoid Solenoid jump with turn engine over fine Getting continuios tone when...

Hi all, I bought an 08 speedster wake today and immediately got on the water. I have a few small glitches with the boat. It has perfect pass installed and the speedo seems accurate to about 25 mph, but it tops out at about 26 mph at wot. I haven't done a gps run yet, but I know we were doing...

First , let me thank all the readers , commenters and Moderators of this Forum. You guys really have an intimate knowledge of these machines. My question is , how would I know if my ( new to me) used 95 Speedster(Twin Rotax 657's) has undergone the direct injected to premix surgery ? What are...

1 :stupid: I SOLD MY RADIO LAST YEAR, AND MY DUMBASS LEFT THE ORIGINAL HARNESS ATTACHED I KEEP LOOKING ONLINE, BUT NO LUCK ...NOBODY ACTUALLY HAS IT IN STOCK IF ANYONE CAN HELP, PLEASE EMAIL ME ASAP ROCKTHISCT@GMAIL.COM Got Boat but no tunes THANK YOU 2 :confused: ALSO THIS...

I'm looking for a boat! Excited, it will be my first. Good amount of experience under my belt though. Love the idea of a fast, maneuverable jet boat. Want it for sun, some boarding, skiing, just want to get out on the water. Decided on about 20ft,about 7 passenger. Heard different things...

Has anyone installed a wake board tower on a 97 speedster? if so any pics would be great aslo any perfered brands.

Hy, I buy one week ago one 96 seadoo boat speedster but no have manuals. How I make the flux to the engines. Sorry for my bad English, I use an electronic traslator for these note. Thanks

Hello all, I just bought a 95 speedster. From a visual inspection looking into the impellers from the grate I can see that the 2 impellers are quite different from each other. One is dull and has very flat blades, it looks like the picture in the shop manual. The other has very curved blades. It...

My 2004 Speedster has a problem with the fuel gauge. It reads empty at 1/2 full. Anyone know how to adjust the pick up?

I purchased a 1998 speedster with the twin 2 stroke 110hp. The exhaust boots leading out of the hull are cracked and leaking ,but upon inspection found that the plastic tuned exhaust <- that's what I was told it was called, the inlet and outlet have melted.I was just going to replace the part...