speedster

  1. V

    1998 Seadoo Speedster

    98 speedster with twin rotax. Starboard side motor runs fine. Port side will crank amd try to start, but as soon as it does, it cuts off. Pulled the carbs and cleaned them. It has sat for a while. Didn't have the best fuel in it on the last run either... Don't want to buy new carbs if i dont...
  2. Gordo

    winterizing exhaust system for speedster 150

    I am preparing to winterize my 2010 speedster 150 with the non SC , a 155 4 tec . I see in the manual that they suggest using shop air to get the water out of the exhaust system. I wonder how is it that when flushing the exhaust with a hose and water the engine needs to be running but when...
  3. BigFord

    2002 Speedster Lt blowing 5amp Fuse on MPEM TWIN ROTAX

    How are you guys, I'm desperate need of a service manual for 2002 Speedster Lt, and need the location of the MR2535 diode on MPEM, just bought the boat as a progect, having a hard time finding info on the MPEM the boat has twin Rotax engines,
  4. R

    In need of a 2008 Speedster 150 Port Armrest! - Buying

    I lost my port side arm rest going out onto cayuga lake in new york. I've looked all over the internet and nobody sells the part anymore. Was wondering if anybody was selling one here or knew anyone that was selling one. The 2009 also fits, the part number is 204614432. Thank you in advance! -R.H
  5. YellowSeadoo2003

    Want to buy a 2010 2011 2012 Sea-Doo 150 Speedster

    Anyone selling their 2010 to 2012 Speedster 150?
  6. gday

    2012 speedster 150 speakers - looking for help

    I'm looking to upgrade my 2012 speedster 150 Jensen ms6007S speakers. In reading through the various threads on this subject, I see that various folks have replaced the factory speakers with either: Exile SX65M Wet Sounds SW-650 B POLK MM651UM speakers. There is talk about fitment issues with...
  7. N

    1999 Seadoo Speedster Fuel Line Size

    Hello, the 1999 Speedster I bought unfortunately has the gray fuel lines. What size should I use to replace them? Also can anyone recommend an inline filter type? Any other things I should look out for while replacing? Carbs and oil pump were replaced last year.
  8. N

    1999 Seadoo Speedster / First Boat?

    Hello all, I have been shopping around for a bit for a Seadoo jet boat. I have settled on the 99 speedster style for the better seat types and the dual engines. I went out to view one today and it was actually in pretty decent shape. He started it up for me and everything seemed great. At least...
  9. AnviL Man

    Which impeller and wear ring do I need?

    2003 Speedster 240 EFI. I want to replace the impeller and wear ring but I am having a hard time finding what I need. I am googling and ebay but I cannot find something that literally says it'll fit my specific boat. I am unaware if other models have the same impeller as mine as I am seeing...
  10. O

    howdy from sydney, australia !

    howdy all, ive been searching for a 215 Speedster for some 2yrs now here in sydney and can never find the right one. prices here are also much more then the US and these boats are very rare. since i want the best of both worlds .. ie Jetski and a boat, the speedster was my one and only...
  11. A

    2004 Speedster 200 fluctuating

    Any help would be appreciated. I have a 2004 speester 200 with twin 155 hp motors. Not supercharged. Consistently after 30 minutes running the port motor will start fluctuating. If I keep running it will eventually turn off. Took it to the dealer and they said its kicking a MAF code but said its...
  12. play2winner

    1998 seadoo speedster rear back seat red needed

    if anyone has a rear back section red seat....i would like to buy it.... i lost mine on the highway and it got squashed! i might be able to re-upholster but i would like to keep it o.e. if possible.... any tips appreciated.... thanks
  13. play2winner

    Speedster Owner in Canada

    I'm a Speedster Owner. I want study from you. Thanks
  14. AnviL Man

    New owner 2003 Speedster

    Hey all, just bought a 2003 Speedster 240 Bombardier. I didn't get a manual with it so there's a couple of things I wanted to know about the boat. The fuel gauge doesn't work and neither does the speedometer. The guy told me he replaced the wire to the speedometer but they gave him a 3 wire...
  15. wdemaster

    Oil shut-off solenoid

    Hello Everyone! I have to apologize if I looked over a thread that contained this question and missed it. I looked fairly extensively and didn't happen across anything. I just bought a 2004 Speedster 200 and got it out on the water this weekend. It was amazing! Well, for the most part...
  16. L

    2005 Speedster 200 4tec SC 185 won't start, check engine light help

    Hi guys- Need some advice. I was running the boat today and heard a long beep while driving but didn't notice any problems. Ran for a bit longer and then shut it down and anchored for a bit. When I when to start up, I connected the DESS, got two beeps. One engine started fine and the other I...
  17. Brettareid89

    Help!!! 1996 seadoo speedster issues

    1996 seadoo speedster Hello all, I am new to posting threads. Bare with me on this topic. I have a 1996 speedster with twin 720 rotax engines, I just took it out of storage after two years. Here's what it is doing.. I put the DESS key on the post I get no beeps and the gauges light up for...
  18. looped1234

    Lifting a 155 speedster

    Lifting a 150 Speedster Hello Anyone know, can you lift a 2009 seadoo speedster by its 2 tie downs in the back and one upfront? Bought a new house on the water with 2 Davits. If not any other ideas on how to lift it with the davits? Are slings hard to use with 2 davits? Thanks, Troy
  19. C

    Need help - Plug wire positions on 787 - 1998 Speedster twins

    Hi guys, I'm restoring 1998 Speedster with twin 787s. I made a mistake and took both wires on both engines off spark plugs before taking a picture.. I need to know where wire #1 and #2 go on the engine, manual has a diagram (parts catalog) but I'm not 100% positive if it is correct and...
  20. moorespeed

    Trim tab on 96 speedster

    I'm new so please let e know if I'm doing somethIng wrong. Im wanting to add a trim tab on my speedster. Due to the twin engines and reading other people's posts, I'm going to have to place it in the center. My problem is the Speedo and plug are in the way. I'm not worried about the Speedo much...
Back
Top