gti

Hello My infocenter gauge for my 96 gti is not functional, corrosion all over the rear contacts. I am looking to just put a standard fuel gauge in. Is it possible for me to get one from a older or newer model and adapt it to work. I had to replace to MPEM last year so im sure the info gauge...

My seadoo started went back to start it again went back to put on the lanyard, it beeped as always, hit the start button, and I heard a click. After trying this 3 or 4 times, nothing happened. I removed the storage compartment in the bow of the boat, all connections to battery were good and...

I have a 97 Seadoo GTI. I replaced all the grey fuel lines and had the carbs rebuilt. The ski was running great until I left the plugs out of the boat. I ran it again after filling it with water and it ran great. Then next time on the water I cranked it and it had this backfire sound and all...

oK HERE WE GO when you first put in water its hard to get it to idle until it warms up (1300-1600 rpm) then will idle fine. After a 20, 30 min ride you shut it off let it sit for five to ten minutes and wont start easily, you have to pull WOT to get it to start then its fine again till you shut...

So back in 2006 I bought my 2006 GTI straight from the dealer. Now it only has 26 hours on it, and before this I have never had a problem with it. I took it out for a spin and it ran fine for about five minutes. It started losing power and speed. The GTI does not have a speedo, but the max rpms...

I live about 5 minutes from the beach and i want to start riding in the ocean. Can someone please give me some tips on cleaning, flushing and caring for the sea doo after i ride in the ocean. Can i spray water into the engine compartment to rinse off the engine and internal components? Should...

i have a 1997 sea doo gti (2 stroke) and the oil in it is running low. this will be my first time changing the oil and i was wondering if you just add new oil on top of the old oil because its a 2 stroke engine? or do i have to drain the tank and add completely new oil to it? Basically what im...

Had a great weekend with my two 96' GTI's. However, one of them started bogging and surgeing towards the end of the weekend. At first I thought it was the old Grey fuel line issues, which I have already ordered hose and clamps and had that on my list of things to do, but I figured I'd be good...

Just bought a 2011 GTI 130 and the black grip matting is beginning to bubble up. Anybody know why?

The towing eye on my GTI 130 is low so the rope drags in the water, and splashes if I am pulling a tube. I was wondering if there is any way I can mount somewhere else on the jet ski or get something that can raise the mounting point. I was looking at the ski pylons but they are very expensive...

So I went to a local sea doo dealer in the area to pick up a flush kit for my 2006 GTi 4-tec. I just bought the ski and I understand that it is a closed loop system, and the only thing I will be flushing out is the exhaust. The dealer game me the OEM flush kit, and the directions tell me to cut...

Hello All, I have been riding my sea-doo for several years now with great satisfaction, but I have always wanted to do some MODS. For the last few years I have been way to busy to really mess with it, but now I have decided I can't wait any longer. I have ridden a few Jet ski's that just...

Hi all, Im after some towing comments really. I want to tow a ringo with a 1997 GTI but can only find videos for 1997 GTX. My question is will they pull the same and spec wise are these similar craft? Engine? Hull? I think the GTI i have is the 727 2 stoke rotax so advice on towing would...

Issues with my 717 seized when hot. This happened to me late last year. I pulled it out of the water and the engine would still not turn. When I got it home, the engine had cooled and would turn and start again. It has sat in the garage untouched since then. I would like to get it back on...

I bought this machine 2 years ago with a blown engine caused by overheating because it ingested gravel. I had the cylinders bored out and installed new pistons. I have broken it in for about 4 hours, and I have some questions. I am not very familiar with Seadoo but have worked on engines for...

The black grill on the storage hood of my 1997 GTI is faded and looks horrible. I have found a new one but I have no idea how to change it. Has anyone done this or know how to do it. Thanks.

Hi all, Tried to start my Seadoo GTI 1997 today and had some not so nice noises. upon connecting the key i get the typical 2 short beeps. Then as i try to start i get the one longer beep. The engine doesnt even try to start and sounds electrical. My first thought was a key issue maybe the...

Hi all, Looking for some advice really. looked at several of the 'first time buyer' threads and got a couple of questions on top. I have just got a Seadoo 1997 GTI. Thought this would be a great ski for someone of my ability. My main questions are about starting from cold and general SOP's...

This past weekend I replaced my wear ring because the old one was badly damaged (as seen below!)and I was getting pretty bad cavitation. I had no problem getting the old one off and putting the new one on. I did not remove the impeller. I took my jet ski (1998 gti) out for a test run this...

I am looking for some advice please. I have owned a small sport boat for years but I am now about to order my first pwc. I have decided to buy the new 2011 Gti but I don't know which motor is best. I have read that the 130 is comparable with the 155's low end torque and start up power but the...