1989 Seadoo Sp oil change

[chilly988]

Hi i am new to this forum and the jet ski world. I frequently work on dirt bikes, 3 wheelers, and 4 wheelers, but this is my first jet ski that i have worked on. I bought this seadoo, cleaned the carb, put some fresh gas down the line and got it to run for a short burst. First i am wondering how to go about draining the gas because when i diconnect the fill tube gas starts to come out because the tanks is so full. Should i just try to siphon some out until its low enough to where i can disconnect the fill tube? Also how would i go about changing the oil in the crank case(not the oil for the oil injection). Any help would be greatly appreciated. Thanks.

 

[LouDoo]

Hi and welcome to the forum.

If the gas tank is too full just siphon some out, or just run it out, you won't believe how much gas these things use. As far as changing the crankcase oil, there is none, the engine gets its lubrication from the oil injection.

Lou

 

[chilly988]

So there is no oil for the bearings and gears inside of the engine? Thanks.