• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

TONS of Sea-doo parts 89-02 XP, SPI, GSX, etc.

Status
Not open for further replies.
I need an MPEM for a 99 GTX LTD, Original P/N 278 001 398 (or 399), updates to 278 001 525 with a programmed lanyard. Lots on EBAY for a 98 GTX but don't want to chance that it may work, both have 3 main harnessconnectors but laid out differently on the MPEM. Do you or anyonme else out there know if a 98 GTX MPEM original P/N 278 001 343 (updates to 295 500 790) will work on my 99?
Thanks,
Chuck
 
Yeah Im pretty sure the 98s used a single coil setup so they were different.

I dont and my brother only has one for a 98.
 
do you have any complete 720 or 717's? I would buy a rebuildable one for the right price? Need electronics, etc (considering doing a swap in my SP)
 
I am looking for a complete red seat for a 97 gsx. Let me know what you can do on one shipped to ny 13077. Thanks
 
PM sent...I have eboxes for the following currently:

93 and 94 XP
94 GTX
94 SP
95 SPI
95 HX
99 GSX-RFI (2)
 
looking for parts for 1997 xp limited

performance parts:
x4(hull) sponsons
intake grate

general parts
seat shock (non rusted)
yellow seat not torn(mine has a tear across it:()
the vtc cover(back lid area the black cover to vtc motor)

feel free to pm me with anything you have.
 
Looking for a complete pump for a 2004 GTI LE RFI . I am looking for a pump I wont have to rebuild with good impeller and wear ring . I have the nozzle and stuff . i just need the pump housing and everything in it
 
Looking for a complete pump for a 2004 GTI LE RFI . I am looking for a pump I wont have to rebuild with good impeller and wear ring . I have the nozzle and stuff . i just need the pump housing and everything in it

Looking for the fuse panel on a 96 Speedster - have one?

Peanut I have the pump complete minus prop.

John, I dont have any boat specific parts.
 
Got a 96 gti with locked 717 twin carb.
Considering repairing or parting to get back money.
Would you have a complete engine with single carb???
Have mine and could send back if its worth anything to you??
 
Ended up not needing the crank case! Thanks anyways though!

How bout a good multifunction info gauge for the 96 gsx?
 
hey, i need good pistons for my 96 gsx. (787) also, i need a gear for my crankshaft and the bearings with seals. (pto side) the gear can be used but do you know were i can pick up new bearings and seals?
thanks
 
Status
Not open for further replies.
Back
Top