DSchmidt54
New Member
Alright guys so to be blatantly honest... I'm sitting in my dorm trying to burn time until i can go home (tomorrow) and start dewinterizing my ski (and maybe go out for a quick test run). So I figured I would make a tread on my entire rebuild of my 336 Hour 1996 Used and abused GTX.
Day One
The Previous Owner had a piece of black card board taped on the hood as a deflector...... and this is how it sat when i first met it lol.:facepalm:
So after a failed top end rebuild..... we realized it was just in our best interest to replace the whole block with none other than.... You guessed it ! an SBT 1 year standard Short block! well, after yanking out the old Core, this is what my hull looked like..... a crime scene in which the old core bled TCW3 everywhere!:facepalm:
The bleeding heart
and then me taking up the remainder of my Father's precious shop space.... as if making the place wreak of 2 Cycle wasn't bad enough lol
To top it all off , I made sure to block is entrance too!
Day One
The Previous Owner had a piece of black card board taped on the hood as a deflector...... and this is how it sat when i first met it lol.:facepalm:
So after a failed top end rebuild..... we realized it was just in our best interest to replace the whole block with none other than.... You guessed it ! an SBT 1 year standard Short block! well, after yanking out the old Core, this is what my hull looked like..... a crime scene in which the old core bled TCW3 everywhere!:facepalm:
The bleeding heart
and then me taking up the remainder of my Father's precious shop space.... as if making the place wreak of 2 Cycle wasn't bad enough lol
To top it all off , I made sure to block is entrance too!