can't get 2 beeps! 1996 xp

[fiddlehead]

when replacing fuel lines do i need to replace the grey lines used as vents also?

 

[Seadoobuddy]

fiddlehead - Some people don't. I did on mine so all the hoses match and just in case some goo moves around to a fuel line.

 

[fiddlehead]

found it, sorry kinda dark in my garage.

 

[bell99man]

Fiddlehead, don't rely on that filter, it sucks. Leave it there and hooked up, but go to the parts store and pick up an in-line filter. Fram makes a G2 or a G12 I think that you just cut the feed line to the carb and clamp in there. I put mine near the oil filter so I could reach it through the seat opening. I got this idea from this forum.

 

[fiddlehead]

bell99man, thanks for the tip i will try that. I am currently struggling with the fuel selector switch. Anybody got any tricks on how to get the damn thing off? I am thinking about getting a new one after but i kinda don't want to destroy the old onel trying to remove it. Thanks forum

 

[Seadoobuddy]

bell99man, thanks for the tip i will try that. I am currently struggling with the fuel selector switch. Anybody got any tricks on how to get the damn thing off? I am thinking about getting a new one after but i kinda don't want to destroy the old onel trying to remove it. Thanks forum

Try removing the center "button" on the outside of knob. should be a nut under that. Unless there is an allen set screw on the side. I was able to clean mine. Be watchful on how it comes apart when you clean it.