1995 XP800 Restoration(Finally)

[AdamXP800]

I am going by a vinyl shop and see what his thoughts are on reproducing them



95 XP800!!!
Keep the 2 strokes alive!

 

[racerxxx]

The material HAS to be correct.

Sent from my SGH-T889 using Tapatalk

 

[AdamXP800]

Yea I talked to him on the phone earlier. He said he will search all of his sources for the correct material. We will see what he comes up with. He said if he can find it, it shouldn't be a problem at all to replicate.



95 XP800!!!
Keep the 2 strokes alive!

 

[AdamXP800]

OEM Decals, not bad

95 XP800!!!
Keep the 2 strokes alive!

 

[1of500]

Missing some. Why is that bar pad still on there and the rub rails?

Sent from my SM-G900V using Tapatalk

 

[1of500]

Need to get those sponsons off too snap to it

Sent from my SM-G900V using Tapatalk

 

[AdamXP800]

Yea I know the bombardier. Not sure wtf happened. I decided to not pull the rub rails. The yellow is buffing out with minimal effort so I really don't see the point right now. I do have all winter so if I'm not satisfied with the look I will.



95 XP800!!!
Keep the 2 strokes alive!

 

[1of500]

Ok but you have no choice but to remove the sponsons you can't just go around them you will have to sand the crap out of it

Sent from my SM-G900V using Tapatalk

 

[1of500]

Yes it's a MAJOR PITA

Sent from my SM-G900V using Tapatalk

 

[Krispy]

I might have some OEM sized remakes from Mike at pwc graphics that say Bombardier, I preferred to replace that with Sea Doo on my 96.


Sent from my iPhone using Tapatalk

 

[AdamXP800]

Yea those are coming off. How close is Mikes Bombardier to the original?



95 XP800!!!
Keep the 2 strokes alive!

 

[1of500]

Idk mine was long gone. Dan should know

Sent from my SM-G900V using Tapatalk

 

[AdamXP800]

The decals should be here soon



95 XP800!!!
Keep the 2 strokes alive!

 

[racerxxx]

It's close. You can get them nos. Lol I have 2.

Sent from my SGH-T889 using Tapatalk

 

[racerxxx]

I'm very impressed with the decals

Sent from my SGH-T889 using Tapatalk

 

[racerxxx]

Oh, he meant the ones on the hood. Those are friggin sick. They're dead on, I don't have them nos. My bad

Sent from my SGH-T889 using Tapatalk

 

[AdamXP800]

Fuel tank removed, oil tank removed, fuel baffle out. Cleaning out the fuel and oil tanks. Tank was replaced under recall already. Someone was running two oil filters, one was installed the incorrect way. The oil is some super thin shit with a weird consistency and smells like apple soap or something, strange

95 XP800!!!
Keep the 2 strokes alive!

 

[AdamXP800]

Some stainless hardware for the mag housing and lowes purple rattle can to paint the pipe and waterbox.



95 XP800!!!
Keep the 2 strokes alive!

 

[AdamXP800]

Mag housing getting a thorough cleaning and fresh coat of paint. All new oem gaskets and seals going on for the install.

95 XP800!!!
Keep the 2 strokes alive!

 

[AdamXP800]

Does anyone have tips for cleaning this?

95 XP800!!!
Keep the 2 strokes alive!

 

[1of500]

Send it to Dan's guy

Sent from my SM-G900V using Tapatalk

 

[suke]

Send it to Racers guy...

Sent from my Nexus 5 using Tapatalk

 

[1of500]

Or buy umi and you won't need it

Sent from my SM-G900V using Tapatalk

 

[AdamXP800]

I like the feel of UMI. But I'm going oem on this one. I'm looking for a ski to buy and mod as well



95 XP800!!!
Keep the 2 strokes alive!

 

[racerxxx]

The bar pad will be coming my way at some point. Slacker, um Adam was too busy on his webinar to take my call to talk. Gonna have to put call rejection on Adam's number. No parts for you!