I know this topic might be overdone, but anyone who has had pipes freeze in winter will understand.
Just purchased a used 2014 Spark and did this to get water out...
-tilted Spark up, started it and let it rev up for about 20 seconds a couple times and saw maybe a litre of water come out.
- attached air hose to left side of 2 inch node but saw no water come out
So my questions...
1- is this satisfactory, should I have seen more water come out both times
2-even if water is still in exhaust, is their enough room for the water to expand without causing damage
3-is their a diagram somewhere that shows how the exhaust system works
Just purchased a used 2014 Spark and did this to get water out...
-tilted Spark up, started it and let it rev up for about 20 seconds a couple times and saw maybe a litre of water come out.
- attached air hose to left side of 2 inch node but saw no water come out
So my questions...
1- is this satisfactory, should I have seen more water come out both times
2-even if water is still in exhaust, is their enough room for the water to expand without causing damage
3-is their a diagram somewhere that shows how the exhaust system works
