Parting out 96 XP Superstock

[LegalizeIt]

Not knowing your mechanical skill level, I'll have to say that the head is DIY, but I recommend someone with more 2-stroke knowledge for the pipe install and the carb rejet and tuning.

If that's not an issue, then if you're interested in the head, exhaust, and 44mm carbs that I have up for sale, I can work out a package deal for you.

The XP is located in Chino Hills. I'm heading up there in the afternoon if you'd like to stop by and take a look at the stuff...

 

[chewyjr15]

i have a good mechanic but he tells me buckshot carbs are just begging for trouble with water intrusion... unless the factory air box cover will fit over the 44mm carbs?

thanks

 

[LegalizeIt]

buckshot carbs are just begging for trouble with water intrusion... unless the factory air box cover will fit over the 44mm carbs?

thanks

:rofl: ... and will cost you a few positions in a closed course race in the surf... Don't ask...

But it's not the carbs that are the problem...

Sounds like you're in good hands as far as a mechanic.

So you've seen this thread?
http://www.seadooforum.com/showthread.php?t=22678

 

[chewyjr15]

ill think about it and let you know

thanks

Joey

 

[LegalizeIt]

cool... :cheers:

 

[LegalizeIt]

I can do $500 for the head and exhaust, local pick-up only.

 

[LegalizeIt]

UPDATE:

UMI steering - sold
Renthal bars - sold
Manual trim system - sold
Finger throttle and cable - sold
Skat Trak 16/24 swirl - sold
Skat Trak C-75 pump - sold
R&D nozzles - sold

WPP CF hood - pending

Everything else is still available.

 

[abie_lah]

im interest about carb and bullet intake,, can u send to malaysia?? and how much their cost ??

 

[LegalizeIt]

This is what USPS (Post Office) charges for shipping to Malaysia:
http://ircalc.usps.gov/IntlMailServices.aspx?Country=10265&M=2&P=10&O=0&sd=0
It includes insurance for up to $1500...
That rate is for up to 20 pounds, so if you need anything else, I can work out a deal.

I can do $360 + shipping.

Parts are ready to ship...

BTW If you can find another shipper for less, let me know.

 

[LegalizeIt]

Thanks Karl,

Sorry for not leaving a link...

 

[LegalizeIt]

UPDATE:

UMI steering - sold
Renthal bars - sold
Manual trim system - sold
Finger throttle and cable - sold
Skat Trak 16/24 swirl - sold
Skat Trak C-75 pump - sold
R&D nozzles - sold
Steering cable - sold

WPP CF hood - sold, pending payment

 

[d!face]

I'm gonna pass on the sponses bro. But I am interested in the electronics. What all included with them?

 

[93mustang97sea]

Do you still got the head and full exhaust still?

 

[LegalizeIt]

I'm gonna pass on the sponses bro. But I am interested in the electronics. What all included with them?

The site was down for a while, so I e-mailed you.


Did you get the box yet?

 

[LegalizeIt]

Do you still got the head and full exhaust still?

Yes, look here:
http://www.seadooforum.com/showthread.php?t=22568

http://www.seadooforum.com/showthread.php?t=22678

 

[LegalizeIt]

UPDATE:

UMI steering - sold
Renthal bars - sold
Manual trim system - sold
Finger throttle and cable - sold
Skat Trak 16/24 swirl - sold
Skat Trak C-75 pump - sold
R&D nozzles - sold
Steering cable - sold
WPP CF hood - sold



Everything else is still available... :cheers:

 

[LegalizeIt]

Here's a partial list of what's left with prices, not including shipping.

Front electrical box complete with 2 DESS keys - 200
Rear electrical box complete with battery tray - 75
JD deep intake grate - 80
WPP trim tabs - 40
Odyssey sponsons - 50
Bilge pump kit - 30
Rave valves complete - 50
Starter - 40
Driveshaft - 50
Flywheel w/magneto - 120
Stator assembly - 75

I'll list the rest later.

Just shoot me a PM if you need more details or pictures.

Thanks...
:cheers:

 

[abie_lah]

starter condition pls,,, and wdd trimtabs pic,,

 

[LegalizeIt]

Starter is coming off my short block; good enough for me to go to the starting line with it.

Trim tabs and Jet Dynamics grate:

 

[LegalizeIt]

starter condition pls,,, and wdd trimtabs pic,,

PM sent...

 

[LegalizeIt]

Abie_lah, you got PM again....

 

[LegalizeIt]

Try again Abie, I just deleted some...

BTW Also got Solas impeller wrench to pick from...

And there's a bunch of Pilot and Main jets with the carbs.


LMK

 

[LegalizeIt]

:cheers:


:leaving:

 

[LegalizeIt]

So we're all clear on this, "pending" means someone has serious interest. It doesn't mean it's sold...

Send me a PM if interested...


Did some checking on the flywheel. Price is reduced to $100 + shipping for flywheel and magneto hub...

 

[LegalizeIt]

Price Reduction...

New prices, not including shipping.

Front electrical box complete with 2 DESS keys (MPEM 278 000 510) - 200
Rear electrical box complete with battery tray - 75
JD deep intake grate - 70
WPP trim tabs - 35
Odyssey sponsons - 50
Bilge pump kit - 30
Rave valves complete - 50
Driveshaft - 50
Flywheel w/magneto - 100
Stator assembly - 75
Flywheel housing and cover - 45
Ignition pick-up - 20
Oem rideplate - 60



Hull, bottom trued and gel-coated by Watoosee Designs, no steering,rideplate, or front cover, comes with JetTrim seat... $250 local pickup only.
Beach tote, welded for strength and powder-coated white... $150 local pickup only.