I has been rebuild cabs and pop-off tested , all fuel line, spark plug and compression test 145 both
I has been set rotary valve at any position 130 , 147 , 149 degree result same.
pump drive it fine.
can turn flywheel by hand.
She can run fine on trailer can reach 7000 rpm.
but on water she can only 2500 rpm.
I has been set rotary valve at any position 130 , 147 , 149 degree result same.
pump drive it fine.
can turn flywheel by hand.
She can run fine on trailer can reach 7000 rpm.
but on water she can only 2500 rpm.
Last edited: