Measuring Device

[YUOnDaGround]

Any one know of a tool to measure out volume? I am trying to stay precise with the 1oz in the oil reservoir. I was thinking about using a syringe from where I work but they only have ML or CC marks.

 

[custompartsguy]

only 1 oz? You can use a 1 oz shot glass?

 

[Chester]

Why don't you just convert oz to ml?

Chester

 

[YUOnDaGround]

I am going by the shop manual and to fill the resevoir on the side ofthe crank case. It needs 1oz of 30 SAE oil. I just had no way of measuring out 1oz.

 

[custompartsguy]

I am going by the shop manual and to fill the resevoir on the side ofthe crank case. It needs 1oz of 30 SAE oil. I just had no way of measuring out 1oz.

http://www.tractorsupply.com/agricu...killers/bonide-reg-4-oz-measuring-cup-4203927

or

6 teaspoons = 1 oz
2 tablespoons = 1 oz​

You can buy measuring cups that have 1oz on them. Make sure it is a liquid measuring cup.​

Another trick is you can use an old empty stabal bottle that has 1 oz in the side part for measuring, just fill the bottle then squeeze the correct amount in.

 

[YUOnDaGround]

Another trick is you can use an old empty stabal bottle that has 1 oz in the side part for measuring, just fill the bottle then squeeze the correct amount in.

That is a dang good idea

 

[seadooya]

use 2-stroke oil for the c/b cavity.

 

[YUOnDaGround]

I was really wondering about that, a SeadooSource says that the SAE30 oil will just leak into the crank case anyway. I really wonder about just dropping the XPS 2-Stroke oil in the resevoir.

Do you need to measure or just top it off?

 

[Chester]

I am going by the shop manual and to fill the resevoir on the side ofthe crank case. It needs 1oz of 30 SAE oil. I just had no way of measuring out 1oz.

There are many metric conversion calculators available free online. http://lmgtfy.com/?q=metric+conversion+calculator
1oz converts to 29.57 ml or cc. So just put in 30 ml.

Chester

 

[lauren bailey]

Does anyone know where i can find pictures or a video of a jet pump rebuild? i have a 1999 seadoo challenger 1800 and my husband jet took out the jet pumps but really does not know what to do next and what proper tools to use without damaging the bearings and washers??????

 

[YUOnDaGround]

Does anyone know where i can find pictures or a video of a jet pump rebuild? i have a 1999 seadoo challenger 1800 and my husband jet took out the jet pumps but really does not know what to do next and what proper tools to use without damaging the bearings and washers??????

Probably not the best place to ask this question.

 

[seadooya]

Do you need to measure or just top it off?

nope, just an oz or so...