Jason horton
Member
I have 2 seadoo gti and spxjust put new mpem on both skies and they will not turn over more than 2 times and I have to disconnect the battery and then reconnect and try again and it beep when I plug up the brown temp wire
Ok they emailed me a diagram that was not helpful. Arieltex is the mana factor. Which I purchase mpem from they say plug and goThe MSD’s are wired differently than the factory or aftermarket replacement MPEM’s. One of the performance gurus might be able to help, but you’re going to need the wiring diagram for the MSD’s to get it sorted.
Where can I get a color diagram of the 96 gti seadoo mpemWhat year are both of the skis you are working on? You’ve either got defective MPEM’s, or you’ve got something wired wrong. If you didn’t have both of the diagrams in front of you when you wired the new MPEM’s into the skis, you DO have it wired wrong... They are not just plug and go, as the wire colors do not match between the Arieltek MPEM and the factory one. If you just matched the wire colors, that’s 100% the problem...
Or any diagram for themWhere can I get a color diagram of the 96 gti seadoo mpem
ok thanksIt should be one of the last few pages of the service manual. If you don’t have one, you can google “1996 Sea Doo Service Manual” and you’ll find a free download.
I’m went to the manual and it in chapter 14 it want let me go past 13Or any diagram for them
ok thanks
It only let me go up to sec 13 diagram is in sec 14Or any diagram for them
ok thanks