Hump seat ?

[Minnetonka4me]

 

[racerxxx]

I'm not down with painting if I don't have to, so I just use an RFI or DI cover with the DESS hole and use a HEYCO plug and a few dabs of silly-cone from the back to hold it. I think it's a 5/8 plug??? and I think Lowes carries them. We have a ton at work so I just snagged a few there.


Heyco plug

 

[Seadoodoc]

Damn racerx those are some super sano looking boats!

 

[racerxxx]

Damn racerx those are some super sano looking boats!

Thanks man, plenty of hours into them, you know how it is. Can't wait to wrap up the 95. Dreams are already forming on the next project......

 

[Rosie2514]

Not to thread jack but from the pictures on this thread I have a machine shop making me some brackets for the steering pads from the newer doos. I have him making 5 of them. Not sure on price yet though.

 

[Seadoodoc]

Will jetrim build a step seat foam scratch? Seemed Matbraley had some really radical seats made?

 

[Jetskigoodies]

[MENTION=74959]Seadoodoc[/MENTION] if you put a @ before matt braley it will notify him that you mentioned him in a post and then he may chime in. As for your ? I think they build up from the foam you already have on your seat. They may do extra custom stuff though. They can make any regular seat a hump seat though.

 

[Jetskigoodies]

Not to thread jack but from the pictures on this thread I have a machine shop making me some brackets for the steering pads from the newer doos. I have him making 5 of them. Not sure on price yet though.

You can make it yourself for the cost of the material that you can probably find laying around.

Mine were going to be $50 each and included hardware but would have some cnc time involved and thick stock.

Those were going to eliminate the extra spacers and trying to get thr height of the spacers right.


If you just use the plate with spacers it will be ultra cheap. Like $6
As long as you have a drill and an angle grinder. A rotozip or bandsaw or a dremil tool would work too.

Just cut to shape and drill some holes. You could even use pvc tube as a spacer, and stainless or aluminum parts that you can manage to make work. It will all be covered so it doesnt need to be pretty.

However I was pretty pumped on having those brackets made but had 0 interest. Everyone wanted to see the design and at that point I knew someone would just copy it.

 

[Matt Braley]

Putting @ before someone's name only notifies them if a moderator does it from what I can tell.

Yes Jettrim will make you the shape you describe and then make a custom cover for it.

 

[Jetskigoodies]

Check your notifications [MENTION=51824]Matt Braley[/MENTION] on the home page under your user name and sign in. It will say mention. Click on the mention and it will take you directly to them comment where you were mentioned. It is almost like paging you. It also creates a link for people to click on, it will take it to your user page.

 

[glsmohio]

putting @ before someone's name only notifies them if a moderator does it from what i can tell.

Yes jettrim will make you the shape you describe and then make a custom cover for it.

matt whats the number for jettrim and who do you deal with?

 

[1of500]

http://jettrim.com/ Jackson is who I have spoken with

 

[Minnetonka4me]

Yup make sure to mention Seadooforum.com and also thanking them for supporting freerides and dropping the twin Cities Jet Pilots name doesn't hurt either! Lol

Sent from my HTC6525LVW using Tapatalk

 

[Seadoodoc]

Good info! Im struggling to keep up with technolgy. Is everyone using tapatalk?

 

[Minnetonka4me]

Yup the PRO version....the free one sucks! That and I still use a laptop.