Lotte
Member
Hello everyone!
I have a fault code on my ski. P0600 (CAN communication problem detected by EMS or MPEM) measured all the wires (white/red and white/black) from the MPEM and EMS and from the cluster. Also the fuses on the MPEM were good. So I can’t find a problem in that.
Also when driving, the red light in the cluster starts to flash and gives a beep. When driving under 2000rpms I can’t use the mode/set button anymore and I can’t see the fuel level and vts. At that moment the jetski gives off a beep.
Does anyone had this problem before and what can I do to fix this?
Thanks in advance
Lotte
I have a fault code on my ski. P0600 (CAN communication problem detected by EMS or MPEM) measured all the wires (white/red and white/black) from the MPEM and EMS and from the cluster. Also the fuses on the MPEM were good. So I can’t find a problem in that.
Also when driving, the red light in the cluster starts to flash and gives a beep. When driving under 2000rpms I can’t use the mode/set button anymore and I can’t see the fuel level and vts. At that moment the jetski gives off a beep.
Does anyone had this problem before and what can I do to fix this?
Thanks in advance
Lotte