8675-30-9
New Member
Well ya gotta love why you join forums. Only problems bring us here and excellent people help ansewer them. In my opinion.....that's awesome, I love these sites. Now, here's my problem....
Jet boat runs excellent when it does run, starts occasionally though. It seems when it is hot outside is when this RANDOM problem show up. To start: As i approach the boat I can hear a faint periodic beep, not sure what this is or even its frequency it so faint. So then I go to initiate my DESS key and literally the second it even gets close to the post it starts the 2 second beep, 2 second pause code very loudly, i then continue to place it on the post securely and NOTHING! not a beep, not a click, not a growl....NOTHING at all when i press either engine button. Yes, i am in Neutral. No matter what I do nothing changes, this includes moving shifter, pushing start buttons, initiating the self diagnostic procedure.....nothing happens. Battery is damn near new. However when it cools off outside I can get in the boat and it will fire right up!
I have taken this boat to my seadoo mechanic, he has scanned both engines and the engine codes and serial numbers were not present in the programming for some reason. Weird. So he put them in and established new information, he says this was the problem. So i dropped it into the water and it started! Awesome. However next day mid afternoon, again the faint periodic beep is back and try to start the engines and the load beeps take place per usual and again NOTHING! It's a 100 Degrees out here and nothing. Super disappointed.
I'm at a loss, my mechanic is super busy and hates working on jet boat versions because he is upside down and does not want to get involved with this problem, because he has not seen it before. Anyone experience this and can offer some insight? Please advise, your response is greatly appreciated.
Jet boat runs excellent when it does run, starts occasionally though. It seems when it is hot outside is when this RANDOM problem show up. To start: As i approach the boat I can hear a faint periodic beep, not sure what this is or even its frequency it so faint. So then I go to initiate my DESS key and literally the second it even gets close to the post it starts the 2 second beep, 2 second pause code very loudly, i then continue to place it on the post securely and NOTHING! not a beep, not a click, not a growl....NOTHING at all when i press either engine button. Yes, i am in Neutral. No matter what I do nothing changes, this includes moving shifter, pushing start buttons, initiating the self diagnostic procedure.....nothing happens. Battery is damn near new. However when it cools off outside I can get in the boat and it will fire right up!
I have taken this boat to my seadoo mechanic, he has scanned both engines and the engine codes and serial numbers were not present in the programming for some reason. Weird. So he put them in and established new information, he says this was the problem. So i dropped it into the water and it started! Awesome. However next day mid afternoon, again the faint periodic beep is back and try to start the engines and the load beeps take place per usual and again NOTHING! It's a 100 Degrees out here and nothing. Super disappointed.
I'm at a loss, my mechanic is super busy and hates working on jet boat versions because he is upside down and does not want to get involved with this problem, because he has not seen it before. Anyone experience this and can offer some insight? Please advise, your response is greatly appreciated.
Last edited by a moderator: