broken exhaust clamp where to buy?

[fatboy_cruzer]

I snapped my exhaust clamp under normal riding yesterday. It snapped right across one of the spot welds. Something simple, but need to get it fixed by this coming weekend. I've tried for about 15 min trying to find one on ebay, google, etc. Any additional pointers for good parts places? Thanks for your time. It's seadoo parts manual item #37 on page A12, pt # 274000151.

 

[racerxxx]

Here's a new one on ebay or PM Minnetonka he's probably got one, Jetskigoodies has one too. Or remove yours and take it and have it tig welded. I'd say a $20 bill could get that done

http://www.ebay.com/itm/NOS-SEA-DOO-274000151-EXHAUST-CLAMP-HX-/251309291070

 

[Spimothy Leary]

I snapped my exhaust clamp under normal riding yesterday. It snapped right across one of the spot welds. Something simple, but need to get it fixed by this coming weekend. I've tried for about 15 min trying to find one on ebay, google, etc. Any additional pointers for good parts places? Thanks for your time. It's seadoo parts manual item #37 on page A12, pt # 274000151.

for a 787 ? heck, i think they're the same for 717's right ?

i'm sure I have a couple of them and could priority out tomorrow.
shipping would probably be as much as the part itself.
where the hell is SECT ?

ps, I see a couple on ebay,
and i'm SURE tonka has a box full of them

 

[fatboy_cruzer]

South East Connecticut. Ledyard specifically. I think there is a difference/exhaust change in 96. All clamps I've found on ebay and looking at the 96 xp parts book they are different part numbers.

 

[Robj]

I believe the 720 and 787 use different style clamps.

 

[Spimothy Leary]

i didn't even know they had part #''s stamped on them, I just toss them in the bucket

 

[racerxxx]

787 and 720 are different.

Spim the correct one should have this on it. I just looked at the one on my 95 XP

Clampco 99514-0438

I went to Clampco's site and it is not a standard off the shelf band clamp.

 

[Seadoobuddy]

South East Connecticut. Ledyard specifically. I think there is a difference/exhaust change in 96. All clamps I've found on ebay and looking at the 96 xp parts book they are different part numbers.

I like your profile pic.....now that Twinkies are back.

Who has eaten the new ones yet? Are they the same?

 

[Spimothy Leary]

787 and 720 are different.

Spim the correct one should have this on it. I just looked at the one on my 95 XP

Clampco 99514-0438

I went to Clampco's site and it is not a standard off the shelf band clamp.

gotcha... thx, I don't mess with 720's ever so i'm sure I don't have one then.

ebay or tonka, but these should be easy to dig up.

 

[Strizzo]

The 718 has two t-bolt style band clamps on a rubber connector I think, the 787 has a v-band clamp holding the pipe to the stinger

 

[racerxxx]

The 718 has two t-bolt style band clamps on a rubber connector I think, the 787 has a v-band clamp holding the pipe to the stinger

Depending on what year I would assume. My 95 XP and 95 HX both have the band clamp like the 787's do(but smaller).