Pwnage1337
Active Member
So I got the battery in and the starter yesterday. After tracing some wires I found 2 burnt fuses. One in the rear electrical box (for VTS) and one in the front grey box. A little 5 amp was shot.
Now when I push the start button I get power to the gauges but when I hook up the lanyard I don't get any beeps. I tested the DESS post and the lanyard with a multimeter and they both check out.
I tried pushing the start button 5 times to go into diagnostic mode and I don't hear any beeps. Could my beeper be shot? I want to crank this thing to check compression but it won't crank
Now when I push the start button I get power to the gauges but when I hook up the lanyard I don't get any beeps. I tested the DESS post and the lanyard with a multimeter and they both check out.
I tried pushing the start button 5 times to go into diagnostic mode and I don't hear any beeps. Could my beeper be shot? I want to crank this thing to check compression but it won't crank