2012 gts 130

[brian lewis087]

having a major headache. I push the start /stop button and put key on the post . got key rec. cluster works , get two beeps. push the start button to start it , and nothing happens, took my meter and started to look, I have constant 12.5 on the trigger line to the solenoid and have 12.7at the F16 fuse. I changed over the two 30amp connectors that is going to the solenoid and put on rings . thinking it was it was broken. when I use my remote starter switch and the starter does turn motor over .. I did try 3 new solenoids thinking one might bad but all three. .. ty

 

[Coastiejoe]

Since you have trigger voltage,, test for 12 volts in and out of the solenoid. When you used your remote switch, how did you connect it, (what did you bypass)? Did youngest he installed battery?

 

[brian lewis087]

one lead on battery and the other on starter side of soleniod

 

[Coastiejoe]

Ok,, you have good battery voltage, cables, and connections. The only wire you are not really testing is the main wire from the battery to the hot side of the solenoid. Hook your jumper from the battery to the input/hot side of the solenoid. Try starting the ski like normal but with the jump button pushed. If you still have nothing, then we need to look at the trigger voltage again. You may be getting voltage, but maybe not a ground... Test for a good ground at the solenoid.