Okay, so having fun learning how to use a Multimeter and check on a couple other things. When I test the center of the post to the white gray wire it's a closed circuit, when I test the black to the Ring of the post it's a closed circuit but with the key on testing black to black yellow it is an open circuit when it should be closed. I did use the screwdriver jumping the solenoid trick and when I do that the engine comes to life. So either the dess post is bad or the mpem lost its program for the key. Is that a thing that can happen? I just got this module with the key from Minnetonka, and judging by his reputation on here I do not suspect an issue with the mpem. I have ordered a dess post and a buzzer, because I I'm not getting any beeps, so I missing that one useful diagnostic tool. It'll suck if the dess post was the problem all along and I didn't need to buy the mpem, but live and learn.