Blowncat 509
New Member
OK the story goes like this, I rebuilt complete engine 3 years ago due to water
Ingestion( bent rod, broken piston) runs great but puts a lot of oil in the bilge.
Cleaned it out, except for some clear water standing. Come back to work and look 2 days later, and has oil floating again.,,can't see anything obvious. Could it be one of the plugs on the bottom of pan? Don't want to have to pull engine again,but it's looking that way.,
Ingestion( bent rod, broken piston) runs great but puts a lot of oil in the bilge.
Cleaned it out, except for some clear water standing. Come back to work and look 2 days later, and has oil floating again.,,can't see anything obvious. Could it be one of the plugs on the bottom of pan? Don't want to have to pull engine again,but it's looking that way.,