01seadoorxblue
New Member
k this spring i sucked up a rope in the inpeller and when i got home i saw that the cooling pipe that goes from the the thing with the red cap on the muffler to the engine side of the black exaust pipe right before the 2 big parts join with the metel clamp. without being cooled, the rubber connecter that connects the pipe to the muffler had burned up and burst. i replaced the burnt connecter and cut the small cooling pipe and reconnected it. i took it out a few more times and the rubber connecter burnt up again. so that means that the exaust pipe isnt getting cooled. but when i drive it i can see water comming out the pipe on the left side on the lower hull. so confused. need some help please.
