TowerDog
New Member
The throttle closest to the front of the ski sticks only when the carbs are torqued to the motor. I bolt them to the rotary valve cover with the cover off the motor they do not stick. I did replace the rotary valve cover with another used one since the threads stripped out of the old one. The motor is a rebuild from SES bought a year ago, I have not had it running yet ( too busy ). Could the rotary valve cover be bent ? Is it an issue with the carb body ? Or a something with the block ? I'm going to take the rotary valve cover to the seadoo shop and have them check it out. Trying to eliminate the problem here so I can ride this year.