Seadoo GTX 2002 no spark

[gbj54]

I have 2002 GTX with the 947 and I currently have no spark, I have no voltage at my ignition coils, I checked the stator with a multi meter and everything was within spec and the wires going back to the mpem were fine so i replaced the mpem with a spare one my buddy had and still the same results. Any help would be greatly appreciated.

 

[POPPS]

could be trigger/pickup,,,,,or the ECU.,,,which contains the cdi.

 

[gbj54]

could be trigger/pickup,,,,,or the ECU.,,,which contains the cdi.

Thanks for the response, I did replace the mpem for what should be a working one. Do you know that the voltage should be coming from the stator while cranking over, and is there a way for me to check the mpem to know for sure it's good?