Seadoo, Can-am, Honda of Winston Salem, NC - GREAT but problems with OEM and shipping.
While my experience was pretty bad buying my 2021 Wake Pro 230, all of the problems were out of dealer control. However they did diagnose my 2001 GTX RFI for free for me, and gave a ton of advice on how to get it working again after some girl sunk it at the lake. I cannot express how cool the guys in the service department were to me. They were also really interested in helping me because they could tell how much research and work I had already done into my older ski (thanks to you guys).
About the 2021 Wake Pro... The first one I had put a deposit on got dropped by a forklift at a different dealership getting some side-by-sides off the truck, and they needed to move my ski to get to them. Seadoo Winston called the rep furious, and had a 2021 released a few weeks early and shipped immediately to me. On arrival the holes below the waterline for the board rack were improperly drilled and the spacing between the two plastic mount pieces was too far. Also the paint all on the bottom of the ski was already peeling and showing bare fiberglass. The dealer talked with me and agreed that during this winter I can bring it back and they will order a second wake rack for me and mount it properly on the opposite side. My plan to get the original one is to print a new bottom bracket reusing the existing holes under the waterline that will make the improper distance work, using my 3d printer. The dealer also agreed to repaint the entire bottom half of the boat during the winter as well. I have all of this in writing. So in the end I get an end of season fresh paint job and with a little work i'll have two board racks on the boat instead of one.
Overall a series of very unfortunate events, and OEM defects. However the dealership time and time again did everything in their power to make things right for me.