beads848135
New Member
I have my Seadoo 94 xp 657x set up with an oil block off plate for pre mix. Wiht the jugs off I was filling the line that feeds the bath. I have it looped with about 2' of clear hose split so I can fill and monitor the oil. I was filling the lower hose with blue 2 stroke oil and holding the upper hose above that level. I expected to see oil filling the crank case which was not the case. It just flowed out the upper hose. The oil that was in the bottom of the crankcase was black so from a previous fill I assume. Am I missing something here? Isn't the oil bath supposed to lubricate the crank? Why shouldn't I see it filling the crankcase?
Thanks,
Beads
Thanks,
Beads


