MPEM Programmer Software Update and Manuals - v3.5D

[Ankeneyou]

I recently purchased an MPEM programmer which came with the original manual and training guide so wanted to share as these seem to be pretty hard to find. Both the manual and training guide are based off of software version 2.4D, but I doubt there is much of a difference with the latest software. I've scanned both manuals to a PDF but still have originals if anything is unreadable. There is a separate addendum for boats I scanned at the end of the pdf for the guide.

I was also able to locate software v3.5D and easily update the programmer with an older PC. You really only need a PC running any 32-bit windows version and either has a serial port or you can use a USB-Serial port adaptor. Update takes about 5 minutes and I had no issues reading and installing the update from a USB thumb drive. If anyone wants v2.4 for whatever reason I also have that on the original 3.5" floppy.

I know this will be for a very limited audience but hopefully the manuals and software will help a few people out there looking to update and just have access to manuals.

Happy Programming!
View attachment MPEM Prog Training Guide 2.4D.pdf
View attachment MPEM Programmer Guide 2.4D.pdf
View attachment MPEM Programmer Software 3.5.zip

 

[Matt Braley]

Thanks. I also have a lot of old floppy discs for these things. I've never seen a version above 3.3D before though. I wonder what I'm missing now. Do you know the difference between 3.3D and 3.5D?

 

[Ankeneyou]

Unfortunatley i don't know the difference between 3.3 and 3.5.

 

[ski-d00]

I will be selling a fully working BUDS system complete with laptop if anyone is interested. It's the older mpi- 1 system that works on everything up til the ibr around 2010.