Jet screw settings?Bogging?

[Geneticsled]

What are the jet screw setting for the jets on the motor side and the hull side. The motor side are high speeds. the hull side jets i am not sure how many turns to put them out have them at almost 1 right now. And the high speed screws as lean as they can go with the plastic cap on. It bogges down and if i pull the choke it takes right off again. Fuel lines just changed, new plugs, carbs and fuel pump rebuilt. I think it has to be jetting. Take off good for about a hundred yard then just bogs right down until i pull the choke.

 

[Geneticsled]

Someone, Anyone?

 

[seadooya]

1&3/4 on the lsa, 0 on hsa

 

[seadooya]

re-install original n/s springs.

 

[Geneticsled]

Witch are witch and do the plastic caps pop off.lsa are hull side right?

 

[seadooya]

black caps are the hsa. Did u install springs from the kit?

 

[Geneticsled]

I didnt put the kit in. But i can probaly find out i replace the fuel lines and it runs better but still not right on. Still bogs bad but now choke makes it take off.

 

[seadooya]

go thru carbs, but dont need rebuild kit.

 

[Geneticsled]

No the carbs were rebuilt just not by me.

 

[Geneticsled]

Nad i have gone though them twice now.Today.