FS: hx 720 to 787 motor conversion bracket

[skoolball23]

I have a 720 to 787 motor conversion bracket for a seadoo hx hull. This way you don't have to glass in motor mounts. You may need to do some shimming to install. This bracket bolts into the stock motor mounts and then you install the 787 motor on it. It is on ebay. Click on this link.

http://www.ebay.com/itm/181089134689?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

[kicker]

That will be crazy fast, good luck with the project. The bracket looks like it will raise the motor a bit, do you have to modify the seat to get it back on?

 

[skoolball23]

No you don't have to modify the seat for the install. You have to use a Neptune or Coffmans rec or race pipe with this setup. You can not use a stock pipe with it, but you might would be able to dent a spec 2, but I can't guarantee that would work. A friend of mine has dented up a spec 2 Factory pipe pretty good and got it to work.