L lilpain New Member Jul 1, 2010 #1 wen rebuilding a carb do i need to use any time of silicon on the gaskets that goes from the carb to the exhaust ports.
wen rebuilding a carb do i need to use any time of silicon on the gaskets that goes from the carb to the exhaust ports.
T tomandamy New Member Jul 1, 2010 #2 hmm not sure of any lubricant but i used permatex black (hitemp/gas) to keep em fresh, also i found alot of white dust (aluminum oxide) i made sure to clean that off and used a vac while doing it so it would not fall into the intake.
hmm not sure of any lubricant but i used permatex black (hitemp/gas) to keep em fresh, also i found alot of white dust (aluminum oxide) i made sure to clean that off and used a vac while doing it so it would not fall into the intake.
L lilpain New Member Jul 2, 2010 #3 oil pump how do i adjust my injection pump. do i mess with the idle nob
