Body Panel Darts!!

[Lovehamr]

Hey guys, my first post about my first real mod on my first ski. Lots of firsts here. I'm installing a garmin 62 on my 2021 GTR230. I have the transducer set, the wiring run etc. But now i have to mount the support system on the rh mirror support but i don't know how to get the plastic darts out without breaking plastic. The push pins are easy enough, i used a plastic auto interior tool for those and of course the torx screws and bolts are no problem. If someone has a trick for these plastic darts i sure would appreciate it! Oh, I'm taking pics as i go because I'm not using the whole $1000 sea doo kit. I'll post what i find at the end

 

[Lovehamr]

Never mind, those don't get removed. The side body panels snap into them in a forward motion once the push pins at the front of each side are removed. Both panels can be removed together by pulling and tapping to the rear.

 

[Lovehamr]

Now about the rear view mirror cover and routing the wire to it... WTF? LOL

 

[Lovehamr]

Back together and works. Hopefully get it in the water this weekend.

 

[Lovehamr]

One more finished shot