• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

Battery Hold Down Straps

Status
Not open for further replies.

LouDoo

Premium Member
Premium Member
In the winter I keep my ski in my sisters garage. So I remove the battery and keep it at home where I can keep it charged.

After years of skinning my knuckles and a lot of cursing I finally discovered an easier way of reattaching the rubber straps. So I thought I would share it on the forum.

Get an open end wrench, from your toolbox, about 1/2", 13mm x about 8", or whatever you grab. Put the metal end of the strap on the hook on the battery tray, I do it on the side toward the engine first. Now put the open end of the wrench through the other metal loop and push it down on the other side, reach down with your free hand and push the metal loop over the hook. Thats it not entirely foolproof but a lot easier.

Lou
 
Last edited by a moderator:
Thanks for the tip Lou,I'll keep it in mind next time I remove mine.Sometimes those simple things arn't so simple and make you say WTF.

LOL !
 
Status
Not open for further replies.
Back
Top