Alternative way to fog engine?

[lashk]

I've got the sportster le di with the 951 fuel injected engine and I'm about to put it away for winter and I had a question for you guys. I have tried fogging the engine thru the tube on the intake silencer with the engine running and it does not seem to work very well. The lube doesn't seem to get sucked into the engine. So, I was wondering if I were to remove the intake silencer and just spray fogging oil into the intake throat with the engine off, if that would be good enough to lube the intake portion of the engine and then do the normal fogging inside the cylinder thru the spark plug holes? What do you guys think?

Thanks

 

[kustomkarl]

The quickest way is to remove the intake plastic cover and spray in the throats of the intake till it stalls. DONE

Karl

 

[lashk]

This is a fuel injected engine, no carbs...

 

[kustomkarl]

Still, spray the fogging spray in the intake... the air still enters the engine the same way. The idea is to protect the internals of the engine against moisture. Foging coats the cylinders, and all the internals.

Karl

 

[boatmonkey82]

west marine has their own brew of stabile that has a fogging oil made into it . i use it on all of my customers boats and never had a problem but with you having di , it will never hit the lower end of the motor . pull the tube off the throttle body and let her rip , its not that bad