• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

95 Spx starter runs continuously

Status
Not open for further replies.

65deuce

New Member
After a full weekend of flawless use, I tied her off at the dock and backed in the trailer, got on untied and pushed off to ride onto the trailer, and the next thing I know, I'm dead in the water with a starter running nonstop :confused:.

I checked the solenoid and it is open when no power is applied, as are both the start/stop and safety switches. I removed the starter cable from the solenoid and as soon as I put cables on the battery I can hear solenoid engage. Electrical box Has no evidence of any moisture..ever..

Since I have owned this ski it has never made any beep noises.

Any suggestions
 
There won't be a beep on a 95 spx...no dess lanyard. It could be the solenoid or start switch is stuck Check the wiring closer.

Karl
 
Well I metered out both the start/stop and the the kill switches, both are working as normal.
When I plug the Mpem into the solenoid I can here it engage. Can the solenoid command circuit be bad on the Mpem...Really.
 
Status
Not open for further replies.
Back
Top