• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

1996 Seadoo SPX no gauges coming on, no start

Earl6094

New Member
I am not getting anything to come on. I have tested the battery and I know that it is fine. I pulled it from my 4 wheeler that I use every week. I just got this ski, and was told that the starter was bad. I jumped the solenoid posts and the starter spins, but the bendix is not kicking out, so I know that it is bad. My issue is that none of the gauges are coming on. It is a non DESS system and the safety switch tested good. The two fuses also tested good.

There was a broken ground from the battery to the starter, so I replaced that already. Is there a ground that goes to the electrical box somewhere?

Any places to check next would be great!
 
First check the fuses on the MPEM. If they are ok then download the 96 shop manual and look at the schematic for your ski. Check that the MPEM is getting power and ground. Then check that it feeds power and ground to the main gauge. That gauge will pass power to the VTS gauge
 
Back
Top