OK so I decided to fix my fuel gauge today and I took it out of the ski. Out of the ski I tipped the fuel baffle upside down and hit the start button twice and the fuel gauge showed full. I then repeated the process with the float in different locations in the baffle, and the gauge showed different fuel levels. So I took the float out thinking its full of fuel and not floating. I put the float in the sink with water in it and it floats. So I put everything back in the fuel tank and hit the start button again and it shows that the ski is empty. I looked in the tank threw the filler hose connection on the tank and can see that the pickup is in the fuel and about 1/8th of the way up the pickup.
Can someone tell me what the problem here might be. If the float, floats, and its able to move, and it registers when out of the tank, then why does it not when in the skis tank.
Can someone tell me what the problem here might be. If the float, floats, and its able to move, and it registers when out of the tank, then why does it not when in the skis tank.