• This site contains eBay affiliate links for which Sea-Doo Forum may be compensated.

94 speedster won't start

Status
Not open for further replies.

chaseschrecker

New Member
I can't get the engines to fire from the start stop switches. I can fire them up by jumping the silenoids. I have bypassed the key the nuetral safety switch the lanyard. Any other ideas?
 
Do the starter buttons work themselves? Hook up a volt meter to test resistance across them, push the button, you should have little to no resistance with button pushed.
 
Thanks man I got it figured out! Just bought the boat and it was missing some fuses in the electrical box. Put them in an it fired right up. It had been sitting awhile and it had alot of oil in the motors and it's running out both the exhaust ports. Hoping this is just what's left in there? I tried to blow most of it out through the plug holes. Hoping it's not possibly something to do with the reeds or some seals in them possibly? I heard it could be leaking seals maybe in the valves causing it to get to much oil? I don't know for sure I'm only a bit mechanically inclined. Lol any ideas?
 
Status
Not open for further replies.
Back
Top