1998 seadoo xpl 951 jetting

[julius gomez]

I have a 1998 seadoo xpl 951 that i need to rejet i have a r&d flame arrester,R&D intake grate and ride plate,Tdr baffled water box, and solas 15/20 impeller and the engine is .25 over what jets and carb setting do you recommend im in Indiana about 700ft over sea level.

 

[Matt Braley]

85 lows, 165 highs. 95 lows if the accel pump is not working.

 

[julius gomez]

85 lows, 165 highs. 95 lows if the accel pump is not working.

the accel pump still works Do you recommend to by pass it?Also do you recommend to stay with the stock pop off pressure

 

[Matt Braley]

Pop off should be about 20ish. If the accel pump gives a good squirt through the brass fittings on both carbs it should be fine.

 

[julius gomez]

Pop off should be about 20ish. If the accel pump gives a good squirt through the brass fittings on both carbs it should be fine.

Ok thank you

 

[changetires]

Are the jet sizes stamped into the jet where you can read them?

 

[mikidymac]

Are the jet sizes stamped into the jet where you can read them?

Jes, the mains are on the top and the pilots are stamped on the side.