gauge

Hi I have a 1999 gtx rfi. The info gauge is not working. If I swap the hole computer from my other one everything works. My question is what controls the info gauge? The silver computer (fuel injection computer?) in the black box, or the black box's cover where all the wires plug in? Is the MPEM...

Both of my seadoos gas gauge don't work they just have the gas light on constantly, any idea whats wrong with them?

i'm having nothing but problems with my VTS unit. Last summer it died out. after it sitting over the winter, and changing the fuse, it seems to be working now. the issue is i can move the trim all the way to the bottom, and the gauge shows its bottomed out, but when i move it all the way to the...

Hi I just recently purchased a 2000 seadoo gtx millenium edition carbed. The spedometer was working on and off the first time I had it out but now it has completely stopped working. Also, the bottom part of the Infocenter (gas gauge) is also not working. I made sure all of the fuses were good...

ok here's my problem. Last year I nailed the face of a wake going about 50 and flipped my ski ripping the hood off. In doing that I completely screwed up my gauge wiring. From looking around on the web I found that the 99 gtxl gauge should work on my ski (according to some people). The part #...

I'm deep in in now... using the instructions in the forum, I jumped the fuse in the fuel baffle awhile back, and tested OK by checking the resistance readings while moving the float up and down. Put a new float in at the same time for good measure. Still no reading on the gauge. After just...

I Purchased a 1995 sp a few months ago and I notice there is a gauge size hole in the front hood with nothing in it. Wasn't too worried about it cause it ran great. But now I'd like to put what ever gauge was there before. I looked under the hood and didn't see any loose ends or wire...

On my 96 XP the VTS gauge doesn't work. Everything else works fine but the gauge. I know im very lucky considering all the problems these vts can give. Where to start. Can I check the gauge somehow? Also is there a way to fuse the VTS system from blowing my computer incase something goes...

I have a 2007 Speedster 150 in which the previous owner added a pretty nice sound system. I have a Perko switch and 2nd batery in the boat to help power everything. Last summer I typically ran the boat on battery 1, and the sound system on battery 2 when we parked. My problem is that I never...

Seadoo/BMP no longer carry my speed sensor assy. Does anyone know of a resource that identifies similar/same components to substitute? My platform is a 2000 sportster LE. The assy PN is 204 470 557. Have not found any sources that stock this. Please help!

Hi, I am getting condensation behind the lens on a couple of my gauges. Are they servicable to fix or are they sealed? Just curious if anyone has attempted to fix. BTW, the condensation only happens when on the water.