720

hello to all, i have a 2001 gti 720, with two issues im not quite sure how to gauge. This is a pretty gone through build light resto. Issue #1 engine bogs at 0-1/4 throttle until clear then takes off. I know its a rich condition for two reasons, if i pull choke it dies. Also i remove spring for...

eBay item number: 125463971734 SeaDoo Rotax 717 720 Rotax Rotary Valve Cover & Oil Injector Assembly Assembly condition: good Oil Pump Flanged P/N: 290 810 781 Rotary Valve Cover P/N: 290 810 528 Oil Pump Assembly P/N: 290 996 725 Original O-ring condition fair. P/N: 293 300 023 Mounting...

Hello all, I have a 95 xp that's stumping me and would like some input please. I bought the ski blown up and decided to buy a good, used engine on ebay. (150psi). It starts and idles nice and smooth, But bogs on acceleration. It does pull out of it eventually but one quick pull of the choke and...

SeaDoo Rotax 717 720 Oil Injector Assembly Assembly condition: good Oil Pump Flanged P/N: 290 810 781 Rotary Valve Cover P/N: 290 810 528 Oil Pump Assembly P/N: 290 996 725 Original O-ring condition fair. P/N: 293 300 023 Mounting Screws condition: very good, new stainless steel lock washers...

Greetings and salutations to all. I got my factory piped 720 assembled and installed this past weekend. I dont have the necessary carbs yet however so its not 100%. I fired it a few times on starting fluid to show some of my buddies. Sadly I saw oil in the hull (this was after an engine out...

Greetings and salutations to all. I recently acquired two factory pipes for the 717/720. Planning on running one on my 95 XP project. Im pretty confident with the jetting/carb setup. But im a little fuzzy on the water injection setup. I have two manifolds. One has the ecwi solenoid and the...

So I recently finished my 1992 Sea-Doo SP 720 swap. It has dual carbs that I just rebuilt. The biggest problem I have been having is about after 30 minutes of riding (rather hard riding) it starts to hit what seems like a much lower rev limit. It is very consistent, which makes me think its...

Hey everybody, I got a 1996 GTI at the beginning of the summer and it ran great all summer and then I went to take it out during Memorial Day weekend and it does not beep when I put the key on the post and doesn’t even crank over or even click. Battery is fairly new I got it less than 2 months...

Here's a video I made testing this thing out, and explaining it, because all the forums I have searched, nobody came up with an answer, all I read was "I just got one, i'll let you know how it works" and nothing since 2009 when they posted it....so if you are interested, like I was, here it is.

Matt, chime in.. This is my current setup.. 1997 Seadoo SP with 720, Factory Performance pipe and ECWI Microtouch, WSM piston kit .75mm overbore, dual 44mm Super BN jetted at 132.5 low/120 high @ 20PSI pop-off,Mounted on Westcoast intake manifold, Ocean pro vortex filters, 150psi x2 , Solas...

Guys, I guess I need to sell this head because I cannot find domes anywhere.These domes are 36cc, and I want to run 95 octane so I guess I would need 41cc??.. Was going to sell for an ADA racing head, but your thoughts?

Matt, I bet you have some for sale.. I am looking for a good race head with domes, around 165PSI so I can mix some 93 with AVgas, , and another set of domes for this buckshot head for the same setup. Anything for sale around here? I thought about going ADA because they are available new, but...

For sale, pictures show it is pretty clean. I havent even tried cleaning it so it should come out really nice.. The domes with it are 36cc, one dome has minor scars in it. Will ship USPS priority packed well. . Text 772-333-91three seven with your offer... I also have a Westcoast 44/46mm...

I have a 1995 Seadoo XP that im parting out. I obtained the ski with no title and i have too many projects going on so i really just want it gone. It's powered by the 720. If you need any parts feel free to comment or pm me. I know the stator is bad. All the electronics are in decent shape aside...

Ill start off by saying im not sure if im posting in the right section...But I have a 1995 Seadoo XP that im parting out. I obtained the ski with no title and i have too many projects going on so i really just want it gone. It's powered by the 720. If you need any parts feel free to comment or...

Hi Everyone, I live in Colombia (South America) and was recently offered this Jet Boat. I am looking for a trailerable boat to be used in lakes and rivers at high altitude (2,600 meters or 8,500 feet above sea level) They are very hard to come by as they were not readily available so that is...

Hello! So I recently acquired a 2001 Seadoo GTI. The previous owner didn't want to pay to have it repaired in the shop so it was given to me to play around with. Upon receiving it, most of the motor was apart, I removed the engine from the ski and striped the rest down to see what kind of...

Just bought my first ski. It is a 2005 Seadoo GTI 720. the tuned pipe is corroded and has sprung a hole (same spot as many I have seen). The pipe is quite corroded I would probably be better getting a used pipe on ebay. What years / models are compatible with a 2005 Seadoo GTI 720? Just...

Decided to try out this plasti dip product. Engine has been sent to SES. Once it's back I will test on the water. Fingers crossed Watch "Plasti dipped 1996 seadoo spx" on YouTube Plasti dipped 1996 seadoo spx: http://youtu.be/RGvT1SPuWd8 Watch "1996 seadoo spx plasti dip" on YouTube 1996...

I am in dire need of a 717 piston and rings, is anyone got any around or parting anything out?