XPL fuel baffle

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Status
Not open for further replies.

Technohedge

New Member
When redoing the fuel lines i forgot which of the smaller lines (fuel return to tank or vent to atmos) goes where on the baffle. Does it matter which nipple these connect to or can they be swapped over?

Also I havnt replaces the vent lines (tank to atmosphere) or the pulse pump line to carb as they dont carry fuel to carb. Simply becase they are difficult to get at. Is this ok or does anyone have any tricks to get to them?

cheers
 
The baffle actually has RES, ON, RET, Vent stamped on it you just may need a small mirror to read it on the xpl.

You'll be fine leaving the vent but pulse should but pretty easy to swap.
 
Status
Not open for further replies.
Back
Top