WTB Seat fo 03 rxdi

Note: This site contains eBay affiliate links for which SeaDooForum.com may be compensated
Ebay?

If you do a search on ebay, you can buy the OEM covers for these seats. They come with the imprinted decals and all. All you'll need to do is take it to an upholster shop and have them put it on for you.........good luck, and welcome to the forum!......
 
You could just buy a seat cover and do it yourself. If you look at the design it is just pulled over the edge with a little from a cloths dryer at a low heat for a couple minutes and the use of a heat gun( wife's or girlfriends hair dryer) and inserted the edge on the brim of the seat. Look at it closely, it's not that difficult to do it yourself.
Karl
 
Labor....

Labor intensive....for about $50 bucks, you could get someone to do it for you....I'd want to get it done professionally.....but, to each his own
 
thanks for the reply's. I can recover it myself. However the chassis of the seat itself is broken. Thats why i am looking for a complete seat.
 
Back
Top