Weather pack pin removal tool for speed sensor connector

[statikuz]

Hey guys. I am in the process of getting the pump support off my ski and have come down to the connector for the speed sensor. I'm trying to avoid having to cut and splice the wires later.

I read this in the manual:

Obviously I don't have Snap-on tool TT600-4. I do have a regular Molex pin tool (like for computers) but that didn't seem to do the trick.

Looking inside the connector I can't see the locking tabs I need to release according to everything I've read.

Anyone successfully pulled the male pins out of one of these connectors? Any other tool I can use? Or has anyone found that tool in an actual store?

 

[racerxxx]

Can't go wrong here. Just about everyone here has bought one.

http://www.ebay.com/itm/Delphi-Pack...012-/371369286410?hash=item5677559b0a&vxp=mtr

 

[Spimothy Leary]

order it on ebay, $7 shipped, the guy ships fast, i've ordered two from him.

http://www.ebay.com/itm/Delphi-Pack...012-/371369286410?hash=item5677559b0a&vxp=mtr

keywords are weather pack extractor

(ps. a good fountain pen sometimes works before bending, just pull the ink thing out of the pen)

 

[statikuz]

Yeah, I found the tool, I was trying to see if I could either find one locally or do it some other way, didn't really want to wait over the weekend to continue this project. But if that's the way then so be it!

Edit: hooray! Looks like I can pick it up tomorrow.

http://www.summitracing.com/nv/parts/sum-900402/overview/
or
http://www.summitracing.com/nv/parts/pco-0660pt/overview/

Also looks like Lisle 14900 serves the same purpose and can be sometimes found/ordered at OReilly.

 

[Spimothy Leary]

bottom line, the tool makes the job so easy, pop pop pop