PWC_Graphics
Member
Hi, guys.
My name is Mike Stowe and I am the owner and designer for www.pwcgraphics.com
Unfortunately - I get so busy that I do not have the time to check the various forums as much as I would like, but I did want to check out this one.
I just wanted to touch on a couple of subject and try to help out.
Many of my reproduction kits are hand-digitized from various photos. Due to the different photo angles, printing methods, materials and differences in cameras, monitors, etc..., I can only guarantee that the graphics will be close.
Once I get the images reproduced, I put them on my template and then size accordingly.
If someone has access to the accurate size of the 95XP800 kit - I can likely alter it to be closer to the correct dimensions.
In the case of the 1998 SPX kit that was mentioned - the customer had the original graphics and I believe I was able to duplicate them near exact.
I would be happy to design a kit for the 1996 XP if anyone is interested. I do not charge extra for the design time, but it is not a quick process. If anyone has access to an original set (or partial set) that makes things much easier.
Another option is to tract the outside edge of the old graphics so I can use that as the basic outline. I can then design the graphics from photos, but make them fit the traced outline. This way - they would be very close to the original.
If there is anything I can do to help or if you have any questions - feel free to shoot me an email!
Thank you very much!
Mike: info@pwcgraphics.com
My name is Mike Stowe and I am the owner and designer for www.pwcgraphics.com
Unfortunately - I get so busy that I do not have the time to check the various forums as much as I would like, but I did want to check out this one.
I just wanted to touch on a couple of subject and try to help out.
Many of my reproduction kits are hand-digitized from various photos. Due to the different photo angles, printing methods, materials and differences in cameras, monitors, etc..., I can only guarantee that the graphics will be close.
Once I get the images reproduced, I put them on my template and then size accordingly.
If someone has access to the accurate size of the 95XP800 kit - I can likely alter it to be closer to the correct dimensions.
In the case of the 1998 SPX kit that was mentioned - the customer had the original graphics and I believe I was able to duplicate them near exact.
I would be happy to design a kit for the 1996 XP if anyone is interested. I do not charge extra for the design time, but it is not a quick process. If anyone has access to an original set (or partial set) that makes things much easier.
Another option is to tract the outside edge of the old graphics so I can use that as the basic outline. I can then design the graphics from photos, but make them fit the traced outline. This way - they would be very close to the original.
If there is anything I can do to help or if you have any questions - feel free to shoot me an email!
Thank you very much!
Mike: info@pwcgraphics.com