So here's what happened...
The back section of the SeaDoo got flooded (where the battery, bilge pump, etc...)
So I replaced the battery. But now whenever we TRY and start the SeaDoo, it will do the following:
All of the fuses were good except the 3A, which dies each time. I unplugged the bilge pump and that seems to resolve that.
MY theory is the SeaDoo won't start without a working bilge pump, could this be it?
Any ideas and help would be great!
Thanks!
The back section of the SeaDoo got flooded (where the battery, bilge pump, etc...)
So I replaced the battery. But now whenever we TRY and start the SeaDoo, it will do the following:
- Put key on... SeaDoo beeps twice
- Push Start/Stop, SeaDoo TRIES to kick over, but quickly dies.
- Push Start/Stop again, it does a long beep.
All of the fuses were good except the 3A, which dies each time. I unplugged the bilge pump and that seems to resolve that.
MY theory is the SeaDoo won't start without a working bilge pump, could this be it?
Any ideas and help would be great!
Thanks!