I'm working on a 2008 Seadoo RXP and the issue is no power to anything. I pulled up an electrical diagram started tracing power from the battery to the Relay Fuse Box, it's getting power and i'm getting power going into the main relay and power on the RE/WH and BK wires of the main relay but no power going out the RE/BL wire going to the Main Fuse Box. I know the relay is good because I took it off my other Seadoo ski that runs fine. Is the RE/WH supposed to have constant power from the relay or does it need to be activated by grounding one of the other wires?