Seadoo GTX 95 Starting problems

[Underwater78]

Hello, my Seadoo Gtx 95 doesnt want to start, my problem is i am not sure how the wires go to the battery, both are red and i dont know if i put it wrong and i blow the module, i put the one cable coming from the electric box in positive side of battery and the other wire coming from i guess the pipe on negative, do this is right? with this setting was trying to start the jet ski but didnt work only making the noise and the flywheel barely move and my battery runs out of energy, put the battery again to charge, later set the battery with the same wiring setting and now only making noise on the solenoid but doesnt even try to start now, do i fry the solenoid or the module? Do the cable coming from the battery and have a small one together at the solenoid from the module goes to negative? Thanks.

 

[greyrider]

your initial wiring configuration sounds correct - sounds like bad battery if a few tries is killing it right away.

 

[Underwater78]

I just got the battery, is new. I dont have spark either.

 

[LouDoo]

Check the battery cables, just because they look O.K. doesn't mean they are.

Try twisting them is the "crunch" they are probably bad.

Lou

 

[Underwater78]

Im gonna try that, thanks Lou and greyrider, i will let you guys know.