Screwed up, need a 951 PTO carb asap

[TubecatGS]

Rebuilt the Mag carb, everything went smooth. I broke the tip of the low speed idle screw in the PTO carb and can't get it out ( yes, I'm a dum dum)
Any tips to get it out? (tried blowing air through it).
Does anyone have a PTO carb for a 951/947. I have the guts/rebuild kit just need a decent carb body with low idle scew kind of quick. Thanks

 

[Saludadoo]

you could try to drill and tap it with a small 6/32 left hand tap
so as you tighten it will back it out.
it is brass so should be pretty easy nothing to lose at this point.

 

[TubecatGS]

It's just the tip stuck in there... so small will never be able to drill it. Thanks though.

 

[TwoSmoker]

Could try slowly heating the body of the carb to expand and let go of the tip? Or use a 90 degree pick to try a push it out?

 

[POPPS]

How about a reversing drill bit, tiny of course, using a drill press?